What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 28.06.2025 11:28
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Here is a simplified AC power diagram.
The other is “what does a “fuse” do?”
LSU vs. West Virginia weather delay: Start time changed for Sunday Super Regional matchup - On3.com
but this device (an Inductor) … impedes the rapid changes in the current.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Upvotes:
The Trump-Musk feud has been great for X, which jumped up the App Store charts - TechCrunch
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
It also is a device that limits the change in current flow.
Edit 2024–10.
Did you know that we white women prefer Black boyfriends?
eight
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
So, the voltage could go up to 500 volts, and the fuse will not open up.
What is the best soap to use for dogs?
2024–10–14 [Omar Gharbi Omar Gharbi ]
This one hit behind the barn.
A circuit breaker is similar, but is resettable.
With a marketing degree, can I do a master’s in film production?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
In schematic diagrams this is the symbol for a fuse:
Barnstars:
Flyers Acquire Trevor Zegras From Anaheim - NHL.com
the problem then depends on "how fast does the fuse operate?".
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Vancouver Whitecaps lose Concacaf Champions Cup final to Cruz Azul - MLSsoccer.com
At one ohm, the resistor has a maximum of 1 watt power.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Now when you have a certain ac resistance, then a current flows in a loop.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
There are two important concepts here.
First Sentence:
These are simplified answers to the original question, and does not change anything I wrote above.
(Dc diagram shown, AC is similar).
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The unexpected mental health consequences of veganism, according to medical research - VegOut
He then asserts :
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
I post the exact comment here.
A fuse is a non-resetable over current circuit protector.
2024–10–10[John johnson John Johnson ]
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
China accuses US of ‘severely violating’ trade truce - Financial Times
The third is lightning and “how it gets conducted into a home.”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is where the MOV conducts again, and dissipated the energy.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
The bolt then partially travels down the line to your home.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
but I think this circuit , shows a few more pieces.
what exactly is a ‘surge’ protector?
One
These devices are installed between the “hot” and “neutral” and protective ground.
What is lightning?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
But… the neutral is now “floating” because of the 1 ohm resistance.
But it can get overloaded, and no longer works.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
2024–10–16 [ OO OLAOYE OYEBODE ]
He then describes the function of a fuse.
For this case there are devices called Metal oxide varistors (MOV).
a photo is worth a thousand words.
so, what happens?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
An AC voltage/ current source, and an ac inductive load.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
It seems Mohan does not understand the difference between a comment and an Answer.
[image of Common-mode choke]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
One is “what exactly is in a ‘surge protector’ ? ”
This is 'the assistant's answer'
What does a fuse do?
This device then solves the entire problem.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Because the load is inductive, the current lags the voltage.(by a bit).
nine
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
[old diagram got deleted by accident]
Can the fuse protect the electronic devices from lightning instead of a surge protector.
There are three different concepts here that are getting confused.
He then describes Rainy Season and Lightning.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
At least they know the answer if they wanted it.
This is where this question deviates from being a 'generic' question, and becomes more specific.